prototype

　mold design

mold making

PP(Polypropylene Homopolymer) data sheet

--------------------------------------------------------------------------------
LEGEND
A = amorphous - Cr = crystalline - C = clear - E = excellent - G = good - P =
O = opaque - T = translucent- R = Rockwell - S = Shore
--------------------------------------------------------------------------------

STRUCTURE: Cr

SPECIFIC DENSITY: 0.90

WATER ABSORBTION RATE (%): 0.01

ELONGATION (%): 200

TENSILE STRENGTH (psi): 4500

COMPRESSION STRENGTH (psi): 6500

FLEXURAL STRENGTH (psi): 7000

FLEXURAL MODULUS (psi): 190000

IMPACT (IZOD ft. lbs/in): 1

HARDNESS: R95

FABRICATION
- BONDING: P
- ULTRASONIC WELDING: P
- MACHINING: G

DEFLECTION TEMPERATURE (deg. F)
- @ 66 psi: 210
- @ 264 psi: 140

UTILZATION TEMPERATURE (deg. F)
- min: -15
- max: 265

MELTING POINT (deg. F): 338

COEFFICIENT OF EXPANSION: 0.00006

ARC RESISTANCE: 180

DIELECTRIC STRENGTH (kV/mm): 23

TRANSPARENCY: T

UV RESISTANCE: P

CHEMICAL RESISTANCE
- ACIDS:
- ALKALIS:
- SOLVENTS: